Speedboat Benchy for Components Kit 010 Remixed by NxtGnPrtHub

Remixed by

NxtGnPrtHub

Hobby & DIY>Vehicles

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 50%/10% infill

Designer

4.6 h

1 plate

4.9(37)

3 colors, 0.2mm layer, 3 walls, 50%/10% infill

6.5 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

600

344

Released

Description

English:

Finally a floating Benchy with a motor!
Clip the motor from the Bambu Lab Hardware Kit 010 onto this Benchy
and let it float in the bathtub, or wherever you like.
No support required! Only one piece ! Print in place !
Leave the door open when printing with PLA/PETG!

If the Wind-Up Engine is sold out at BL, you can buy it here.

Endlich ein schwimmendes Benchy mit Motor!

Klemmen Sie den Motor aus den Bambu Lab Hardware Kit 010 an dieses Benchy
und lassen Sie es in der Badewanne, oder wo auch immer Sie möchten, schwimmen.
Kein Support erforderlich ! Besteht aus nur einem Teil !
Lassen Sie die Tür offen beim Druck mit PLA/PETG!
Falls der Motor bei Bambu Lab ausverkauft ist, bekommen Sie diesen auch hier.

Bill of Materials

Bambu parts

Boat Model Components Kit (1pcs)-010

MH010

× 1

Purchase from Bambu Store

Comment & Rating (72)

@LuckyHalfling

Print Profile

0.2mm layer, 3 walls, 50%/10% infill

super cute boat, the variable infil for ballast was really fun to watch. printed in inland clay rainbow PLA

The designer has replied

@NxtGnPrtHub

Thank you for your rating!

@Bughy

Print Profile

0.2mm layer, 3 walls, 50%/10% infill

thank you!

The designer has replied

@NxtGnPrtHub

Thank you for your rating!

@i3Dprint

Print Profile

0.2mm layer, 3 walls, 50%/10% infill

So gorgeous in rainbow silk!!!

@marty_prints

Boosted

Print Profile

0.2mm layer, 3 walls, 50%/10% infill

Came out real nicely. Floats without any problems, nice and stable boat.

The designer has replied

@NxtGnPrtHub

Thank you for awesome rating! 👍 🙏 It will greatly support my work on such designs. If you will boost 🧨 this design! (Klick on the small Rocket 🚀 or "BOOST" button) 🙏. Happy printing and feel free to check my another BambuLab designs 👋 😇.

@user_3767316384

Print Profile

0.2mm layer, 3 walls, 50%/10% infill

First bamboo print and came out awesome.

The designer has replied

@NxtGnPrtHub

yeah, amazing, thank you for your rating!

@SpudTree

Print Profile

0.2mm layer, 3 walls, 50%/10% infill

Turned out great in Polyterra PLA!

The designer has replied

@NxtGnPrtHub

Thank you for your rating.

(Edited)

@user_4252402033

Boosted

Print Profile

0.2mm layer, 3 walls, 50%/10% infill

The designer has replied

@NxtGnPrtHub

Thank you for your rating!

@NxtGnPrtHub

@user_1931815390

sooooo...you simply DELETE reviews that are not 5-star!? now that's easy, your boat is missing some pieces in order to attach the motor in an efficient way, needs glue in order to keep it on. not a good model!

The designer has replied

@NxtGnPrtHub

If everything gives 5 stars and no one but you has this problem (it works perfectly for me too), then your comment is not meaningful. The problem then probably lies with you rather than with the model.

@user_1931815390

Replying to @NxtGnPrtHub :

let me rephrase: you delete all the non-5-star comments, so there is no trace of your silly doings... your boat IS MISSING a decent attachement, even on your pictures you can see the motor clamp is NOT a square but would need a kind of railing (round) to sit on....whatever man, you are not worth losing my time here...

@NxtGnPrtHub

Replying to @user_1931815390 :

Total nonsense. By the way, Bambu Lab deletes the comments that are wrong, not me. And that has nothing to do with scoring. Pic 1 my model, pic 2 bambu lab model.

(Edited)