Door Stop | Bloque‑porte

🇫🇷 Description (French)

This compact doorstop is a practical everyday accessory designed to easily keep a door open. Its inclined wedge shape allows it to slide under the door to prevent it from closing, even with drafts.

The design incorporates an openwork structure that provides rigidity while limiting the amount of material used. The system uses an M3x35 screw and an M3 nut for attaching the pedal.

The doorstop can be fixed to the floor with double-sided tape for better stability and to prevent it from moving during use.

Ideal for home, office, workshop, or garage, it is a small, simple, but very useful everyday accessory.

Hardware Required

• 1 × M3x35 screw
• 1 × M3 nut

Recommended Print Settings

• Material: PLA or PETG
• Layer height: 0.2 mm
• Infill: 15–20 %

🇬🇧 Description (English)

This compact door stop is a practical everyday accessory designed to keep doors securely open. Its wedge shape allows it to slide easily under the door to prevent it from closing, even with airflow.

The design features a lightweight reinforced structure that provides strength while reducing material usage. The mechanism uses a M3x35 screw and an M3 nut to create an adjustable locking effect, improving grip and stability depending on the floor surface.

The door stop can also be fixed to the floor using double‑sided tape for better stability and to prevent it from moving during use.

Perfect for home, office, workshop, or garage, this is a simple but very useful everyday print.

Hardware Required

• 1 × M3x35 screw
• 1 × M3 nut

Recommended Print Settings

• Material: PLA / PETG
• Layer height: 0.2 mm
• Infill: 15–20 % :::