Articulated dust hose for woodturning (75mm PP)

Made to fit 75mm PP pipes. Fuzzy skin setting on gives a nice tight fit - you might have to sand it a little and apply a good amount of force to snap the pieces together. This does result in a great and very solid fit so the hose stays in position.

Two plates in the file.

Plate 1 has one of each element (1 connection from 75mm pipe to flex hose, 1 joint, 1 funnel and an option adapter that will allow a 100mm hose to connect to the other end of the 75mm PP pipe.

Plate 2 just has 4 hose joints that you can print later if you need a longer hose.

Remix based on the nice model by Marius Hornberger, but that model connects to a 100mm pipe and is very loose when fitted together.