Container for old batteries
Print Profile(1)
Description
Container for old batteries
This is a container for old batteries. The lid snaps into place and is then well secured to the bottom part of the container.
The dimensions are 150 mm x 150 mm x 170 mm.
The hole on the lid has a diameter of 65 mm.
The locking mechanism:
Bottom part:
The colors of the symbols and labels on the lid are freely selectable in the slicer.
The lid:
Print Information - Material and Build Plates:
- I used PLA Basic from Bambu Lab for both models. PETG is also a good choice
- Build Plate: Textured PEI - Plate
- The STL files are also available.
Print Settings with PLA - BASIC:
Lid
Wall lines: 2
Detect thin walls: Yes
Layer height: 0.2 mm
Infill / Infill pattern: 30% / GYROID
Ironing type: TOPMOST LAYER ONLY
Ironing pattern: RECTILINEAR
Seam position: ALIGNED
Wall generator: Classic
Support type: NONE
Bottom part
Wall lines: 2
Detect thin walls: Yes
Layer height: 0.2 mm
Infill / Infill pattern: 30% / GYROID
Ironing type: TOPMOST LAYER ONLY
Ironing pattern: RECTILINEAR
Seam position: ALIGNED
Wall generator: Classic
Support type: NONE
Speed setting: Slow down after height
All other values remain at default.
Boost Me (for free)
If you like the model, I would be very happy for your support with a Boost and a thumbs up!
Happy printing!
Documentation (1)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)