Clear Creek Creations

cover

3811.jpg

3774.jpg

PETG part with PLA support interface

plate_1.png

PETG part with default support interface

plate_2.png

PLA part with default support interface

plate_3.png

PLA part with PETG support interface

plate_4.png

17017fcd17453991.jpg

installed.jpg

printed.jpg

print profile.jpg

<ul><li>Print profile for this 3mf file uses a 0.1mm layer thickness to reduce visibility of layer lines in the chamfers</li><li>Supports required for the bolt hole</li><li>The 3mf file has 4 different plates with different material and support settings</li><li>My preference is to use a dissimilar material for support interfaces with PETG whenever possible</li><li>Plates for PLA and default supports are included</li></ul><p>&nbsp;</p>

0.1mm layer, 4 walls, 15% infill

<p>This model was a commission to cover the post and bolt hole left after removing the armrest from a 2010 Chevy Suburban. A couple iterations landed on this design for ease of printing and the lowest possible profile, with 1mm of solid material covering the post.</p>

2007-2014 Suburban/Tahoe/Yukon Armrest Delete

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models