1:72 China Type 89 Tank Destroyer - kit card model

March 30 Update:

Newly uploaded a track printing file: easier to print tracks (with supports version), the model itself has not changed, only the placement direction is reversed, the first layer is easier to print, but with supports, printing time has increased

March 19 Update:

Updated the 1:72 scale kit card model, tracks are separated individually for easy multi-color printing:

Tank Destroyer Introduction:

The Type 89 Tank Destroyer, officially known as the PTZ-89 120mm Self-Propelled Anti-Tank Gun, is a tracked armored vehicle developed by China in the 1980s. Its core is a 120mm high-pressure smoothbore gun. As one of the few modern tank destroyers, it is often hailed by military enthusiasts as the "Eastern Ferdinand."

The vehicle was mass-produced and equipped in the early 1990s, with the upgrade of Chinese tank equipment in the 21st century, this type of tank destroyer was fully retired in 2015.

All the above data is based on publicly available online information

3D Model Introduction:

This tank model is at a 1:72 scale and is divided into a kit card version and a non-kit card version. The kit card version can be downloaded and printed directly, but you cannot adjust the placement direction and position of the parts. If you need to adjust the placement direction and position of the parts, please download the non-kit card version. Both versions are 1:72 scale. If you need other model scales, please proportionally adjust the print part size yourself.

Printing Notes:

Please select Arachne mode for the wall generator to prevent supports under the barrel from not printing correctly. As shown in the figure below, this thin-wall support can effectively prevent spots from appearing at the bottom of the barrel

Please refer to the following steps for assembling this model: