Obvious Choice Spinner - infinite choices!

Ultimate Choice Spinner - Deluxe version

Can change out the wedges whenever you want :)

The magnetic wedges can be swapped for other wedges as well.

If you don’t plan on swapping you can just forgo the magnets and glue the wedges in place.

Very easy print just set up your colors the way you like and then get magnets ready.

The 8 magnets go in the base with one polarity and into the wedges with the reverse.
 

If you don't have a magnet dispenser that allows you to separate the polarities a really easy way to do it is to use a sharpie and color one with the marker.
 

I just take a stack of magnets and then color the top one on the flat, move it to bottom, then color the next, move to bottom, and keep repeating until you have one side of each magnet colored.
 

Then all you have to remember is that when putting the magnets into the print put the one with the sharpie side colored face down (or up) for the base, and then do the revers for the wedges. 

When assembling put the center pin in from the back, then slide spacer disc on, then the pointer.

Spacer disc is important so that the pointer doesn’t touch the surface. 
 

There are 3, one is 2mm, 2.5mm and other is 3mm. You may need two, but you want spinner to spin freely so use whichever give you the best spin. If you need to go larger or smaller only adjust Z height of the disc or it will not fit.

Then put whatever choice you want it to land on at the 6 o’clock position.

Have fun!

The wedges are designed for an endless variety of modifications so very easy to customize to your needs.  Stay tuned for more to come for games and other things.

As always if there is something of mine that you like and would like tweaked in someway or perhaps something new created, please send me a message!