Search models, users, collections, and posts

EasterBunny

piodeer
Household>Festivities
IP Report
GIF

Print Profile(3)

All
H2S
H2C
A1 mini
P2S
P1S
X1
X1E
H2D
A1
P1P
H2D Pro
X1 Carbon
X2D
A2L
Mesh (0.2mm layer, 7 walls, 15% infill)
Mesh (0.2mm layer, 7 walls, 15% infill)
Designer
28 min
1 plate
4.3(3)
Mold (0.2mm layer, 2 walls, 15% infill)
Mold (0.2mm layer, 2 walls, 15% infill)
Designer
10.4 h
1 plate
0.2mm layer, 2 walls, 10% infill
0.2mm layer, 2 walls, 10% infill
6 h
3 plates
Open in Bambu Studio
Boost
426
1195
26
11
647
165
Released 

Description

Easter Bunny Mesh Mold

Elevate your 3D prints with this DIY mesh Easter bunny! 🐣 Shape two hollow shells using heat, fill them with candy, and snap them together with clips.

 

🛠️ Materials & Printing

  • Molds: Print in PC (Polycarbonate) to withstand hairdryer heat without deforming. 🔥
  • Mesh Blank: Print in PLA.
  • Assembly: Soften the PLA blank with a hairdryer, press into the molds, fill with sweets, and secure with the included clips.

 

⚠️ Mandatory Slicer Settings

To achieve the mesh effect, these settings are required:

  • Top & Bottom Layers: 0
  • Wall Count: 7
  • Note: Changing these will ruin the mesh structure! 🚫

 

🎨 Customization

Feel free to experiment with the Infill Pattern and Infill Density to change the look of the bunny's "skin." ✨

 

Boost Me (for free)

If you enjoy my designs, please consider leaving a Boost! Your support helps me cover filament costs and allows me to keep creating high-quality, tested models for the community.🚀

Membership

Want to sell physical prints of this EasterBunny? Join my membership program! By becoming a member, you gain the legal right to sell printed versions of this model and my entire library of unique, eye-catching designs. Boost your shop's success with high-quality prints made to delight your customers! ✨

Join


 

easter
easterbunny
mesh
mold
cute
sweets
bunny

Comment & Rating (26)

(0/1000)
@Dan_GRUS
Boosted
Print Profile
Mesh (0.2mm layer, 7 walls, 15% infill)
Printed nicely. Thanks for sharing.
0
Reply
@Zeeza
Where can I find the molds?
The designer has replied
2
Reply
@piodeer
switch to download STL and there you find both 3mf files
1
Reply
@Zeeza
Replying to @piodeer :
Thank you!
1
Reply
@gettygas2
Replying to @piodeer :
Worked for me ty
1
Reply
@jema3d
I did not find the STL files for the molds
The designer has replied
Show original
1
Reply
@user_2916279986
no, nor I.... a little disappointing
1
Reply
@piodeer
watch here
1
Reply
@MINIBochum
Can anyone screenshot the settings for me, I can't print the mesh correctly, what am I doing wrong?
The designer has replied
Show original
2
Reply
@piodeer
top and bottom shell layer must be 0 select an infill pattern that suits you and set the wall count to about 7 then you should get a correct mesh
Show original
1
Reply
@user_2132532944
If I use the hairdryer and then press the mold on, the edge of my mesh blank always deforms with it. Am I doing something wrong? I can't get the mold in as easily or as deep as shown in the video
Show original
1
Reply
@Firesteal
exactly the same problem, the edge warps in 50% of the attempts with
Show original
0
Reply
@user_271947816
Unfortunately, I only get a plate with the rabbit. The plate with the 2 shapes is unfortunately missing
The designer has replied
Show original
1
Reply
@piodeer
watch here
1
Reply
@Kiouki
Would PETG work too? I am hesitant to print PC/ASA etc. I do have 2 enclosed printers, but no external filter attached to them due to space limitation.
The designer has replied
1
Reply
@piodeer
yes petg works to, but i woud be careful while heating. and maybe the mold dont last a lot of cycles...
1
Reply
@nimeakira
legal he puts the screen but not the templates
The designer has replied
Show original
1
Reply
@piodeer
you can find the templates if you press download stl...
1
Reply
@FOIXTRA
Cool model! Do you offer a membership just to sell this item at all?
The designer has replied
1
Reply
@piodeer
yes if you scroll completely down there is am membership button
1
Reply
@crialis_perso
Unfortunately, mine gives an error and doesn't fill the rabbit
The designer has replied
Show original
1
Reply
@piodeer
send me a screenshot of your error message
1
Reply

License

If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Easter Bunny
Easter Bunny
valsoa79
8.5 k
2.2 k
Easter Bunny Decoration
Easter Bunny Decoration
deLira
2.8 k
1.5 k
Low poly easter bunny
Low poly easter bunny
Pejdro
1.9 k
789
Easter Bunny Egg
Easter Bunny Egg
Problem
4.4 k
1.3 k