Adjustable Fridge Cup Holder

🇩🇪 German:

This parametric fridge cup holder keeps your cups securely and neatly on the refrigerator shelf. The clever clip system simply clamps onto the shelf – completely without screws. The model consists of two side parts, one connector, and four pins that are simply put together.

All important dimensions are freely adjustable:

• LAENGE – Corresponds exactly to the width of your refrigerator shelf. Recommendation: enter measured value + 2 to 3 mm so that the holder sits cleanly and does not jam.
• Becher_Breite – Width of the cup body without the top rim. Recommendation: enter measured value - 1 to 2 mm. (see image)
• Becher_rand_Breite – Width of the small rim at the very top of the cup. Recommendation: enter measured value - 1 to 2 mm. (see image)
• Becher_rand_dicke – Thickness of the rim at the top of the cup. Recommendation: enter measured value + 2 mm so that the cup hangs securely. (see image)

• Bodendicke – Corresponds exactly to the thickness of your refrigerator shelf. Recommendation: enter measured value + 1 to 2 mm so that the clip system clamps cleanly.

   

Recommended Print Settings:

• Wall loops: 3
• Infill density: 5%
• Infill pattern: Triangles
• Brim type: Outer brim only
• Brim width: 15 mm

🇬🇧 English:

This parametric fridge cup holder keeps your cups neatly organized on your refrigerator shelf. The clever clip system simply snaps onto the shelf – no screws needed. The model consists of two side parts, one connector and four pins that simply click together.

All key dimensions are fully adjustable:

• LAENGE – Matches the exact width of your fridge shelf. Recommendation: enter your measured value + 2 to 3 mm so the holder sits cleanly without jamming.
• Becher_Breite – Width of the cup body without the top rim. Recommendation: enter your measured value - 1 to 2 mm. (see image)
• Becher_rand_Breite – Width of the small rim at the very top of the cup. Recommendation: enter your measured value - 1 to 2 mm. (see image)
• Becher_rand_dicke – Thickness of the top rim of the cup. Recommendation: enter your measured value + 2 mm so the cup hooks in securely. (see image)
• Bodendicke – Matches the exact thickness of your fridge shelf. Recommendation: enter your measured value + 1 to 2 mm so the clip system grips cleanly. 

 Recommended Print Settings:

• Wall loops: 3
• Infill density: 5%
• Infill pattern: Triangles
• Brim type: Outer brim only
• Brim width: 15 mm