10° Table Leg System - No Angled Cuts Required

UPDATE March 2026: Added a second print profile! Now includes a 10° Angled Shoe. You can now build your table with zero angled wood cuts. Just cut the wood straight and use the complete 3D printed kit!

This is now a complete system to build Mid-Century Modern furniture without any complex woodworking.

A 10° angled table leg bracket designed to securely mount wooden legs and create a stable, modern table structure.

This 10° angled table leg bracket is designed to make furniture assembly simple, fast, and reliable.

The bracket ensures precise and repeatable leg alignment, eliminating guesswork during installation.
Its geometry improves load distribution, resulting in a solid and stable structure once mounted.

Installation is straightforward and requires only standard screws and basic tools, making it suitable for both DIY builders and small workshop projects.
The design has been tested on real furniture, as shown in the photos, to ensure proper fit and structural integrity.

Ideal for tables, benches, desks, and custom furniture where strength, accuracy, and clean assembly are essential.

🧠 Why this tool is useful

Building angled table legs usually requires careful measuring and repeated adjustments.
This bracket simplifies the process by providing a fixed 10° angle, guaranteeing consistency across all legs.

By reducing setup time and improving rigidity, it allows you to focus on the build itself while achieving professional and durable results.

🚀 Key Features

• ✔️ No Angled Cuts: Use straight-cut wood for the entire project.
• ✔️ Complete Kit: Includes the high-strength Top Bracket and the matching Angled Foot.
• ✔️ Maximum Solidity: Features an engineered mechanical connection and robust internal fillets.
• ✔️ Protective Foot: The shoe protects your floor and provides a clean, professional finish.
• ✔️ Simple DIY Installation: No complex angled wood cuts required. Just straight cuts for your wooden stock.
• ✔️ Flush Countersunk Base: Pre-countersunk holes so screws sit flush with the plastic, protecting your tabletop.
• ✔️ Universal Square Sock: Fits common 40x40mm (or proportional) square wooden legs.
• ✔️ Tested & Proven Design: Optimized for high strength when printed with recommended settings.

🖨️ Recommended Print Settings 

Materials

• Strongly recommend PETG, ABS, or ASA for structural integrity. PLA can be used, but consider the total table weight and load.

Settings

• Walls: Minimum 6 Perimeters. (Crucial for strength).
• Infill: 40% Gyroid minimum.
• Layer Height: 0.16mm - 0.2mm recommended for maximum layer adhesion.
• Supports: Not required
• Print orientation optimized for strength

🔧 Assembly Steps

• Print 4 Brackets and 4 Feet (use PETG/ASA for strength).
• Cut 4 wooden legs to your desired length (straight cuts only!).
• Mount the Brackets to the tabletop.
• Insert the legs into the Brackets and secure with screws.
• Slide the Angled Feet onto the bottom of the legs. Done!