Personalized HoneyBunny Ornament – PARAMETRIC

🐰 Meet the HoneyBunny Ornament                          

• Fully Customizable: 
  • Add one or two names
  • choose your font
  • features like cheeks, ears, and tails with a single click.
• Multi-Color Without AMS: 
  • The design is engineered in distinct, height layers (0,16).
  • Use your slicer’s "Pause at Height" feature to swap filament manually. 
  • Simply pause when a new layer starts, switch colors, and resume. 

Note: For the best results, keep the default height/thickness settings in the code and print with layerheight 0,16. These are precisely calculated to ensure your color-swaps align perfectly. Use the "Pause at Height" feature in your slicer to swap filaments manually:

• Pause 1: At 1.60mm (start of the Overlay/Text, Layer 11).
• Pause 2: At 2.40mm (start of the Pupils, Layer 16).

User Manual

• Thickness and heights:  This setting is correctly configured by default; no further action is required. Note: If you decide to adjust these values, please be aware that the pauses on layer 11 and 16 may no longer align correctly.
• Color Settings: This setting is correctly configured by default; no further action is required, unless you wish to utilize AMS.

Check out the other items in the Hopper Family collection to complete your full table setup! 

⬇️ Click the image below to visit the collection:

 .