10" Rack mount for 4x2.5Gb + 2x10Gb switch

I designed this 10" rack mount for my managed 4x2.5Gb + 2x10Gb switch. 

These are sold under many different brands (Horaco, Lianguo etc.) but all appear to be Sodola switches under the hood, using the same hardware and the same chassis. 

Designed according to the specifications shared by Jeff Geerling; it should fit both “proper” 10 inch racks as well as 2020-aluminium-extrusion based racks (like mine).

You don't need additional hardware for mounting the switch to this rack plate, just slide the switch in and back out/undo the two front screws ever so slightly. This locks the switch into place.

I printed mine out of HT-PLA. If you don't know what to use: PETG is probably the best choice, though you may need to play with the scaling factor a bit to account for material shrinkage.

It may also fit the 5x2.5Gb +1x10Gb version; let me know if it does!