1-meter Armored Unicorn Full Version [Experimental Unit]

[Final Update and Notes]: All printing parts have been completed in the print profile section. Fans who have already printed other parts can simply choose to print the lower body!

[Disclaimer]: It is highly recommended to watch the corresponding video (you can find it by searching the same name on Douyin or Bilibili) before deciding whether to print! This is because the printing difficulty of this work is very high, the center of gravity standing issue has not been resolved, and the design ideas were not fully thought through. We hope that by open-sourcing this, experts can use it as a sample to develop something even better!

Not for beginners! Do not print if prone to spaghetti! Currently, I have not encountered spaghetti issues, only problems with the design and structure. Unfortunately, I cannot provide a perfect model!

However, I have already restarted a new plan-------

Instructions before printing! Instructions! Instructions!

1. Current update progress: Lower body, Status: Completed

2. All files have been updated in the print profile

3. Not recommended for beginners!

Simply download and print the unprinted parts

Points to note:

1. For installation, you need to match each part by name. You can also refer to videos and pictures to guide you. Essentially, every part has a corresponding hole, so installation should be correct.

2. Before assembly, check the installation order and see if there are any jamming issues. It is crucial to dry fit the parts; otherwise, you might install them incorrectly!

3. Due to model design issues, I did not fully consider everything, which led to an overly tight fit during assembly. Each square mounting peg needs to be shaved down.

The main body is 1 meter tall. Printing parameters are suitable for A1 and above; please pay attention to parameter alignment.

Still the old style: PETG for the internal structure, PLA for the outer armor. Uses a 0.4mm nozzle and 0.12 BBL process. The texture is exceptionally good!

[Eager to release, it's a bit rough, but I also want to announce this plan to everyone here. I hope you like it.]

Installation difficulty is very low. Those who have printed other Gundam models should find it a smooth installation. If you need help with installation, search for "Hui Zong's Latte" on Douyin (or other platforms with the same name). Feel free to raise your hand and ask questions.

It is highly recommended to watch the video for better installation, and you can ask questions directly! 3D printing requires communication!