PORSCHE SERVICE ~ 2-Sided Hanging Pub Style Light - Free 3D Print Model

Search models, users, collections, and posts

ChopperOriginals

Household>Decor

IP Report

This model is created by Lightbox Maker

Make Your Model

Print Profile(1)

All

P1S

H2S

H2C

P2S

X1E

H2D

P1P

H2D Pro

X1 Carbon

X2D

A2L

0.2mm layer, 2 walls, 20% infill

Designer

11 h

7 plates

5.0(6)

Open in Bambu Studio

Boost

121

333

130

Released

Bill of Materials

Bambu Filaments

Select all

Description

All Compatible Lightbox Frames & Mounts Available Here!

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues) Magnets (for optional mounts)

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

This custom PORSCHE SERVICE -style lightbox is a fully 3D printed, double-sided wall sign designed to hang from a faux black pipe bracket with chain — all printed, no metal required.

The entire setup (pipe, brackets, chain, and lightbox housing) is 3D printed. The only hardware needed is your own LED strip kit. The example shown uses a wireless battery-powered LED strip with remote.

I use these LED lights linked here and you can link them to an app on your phone. https://a.co/d/057lMkKx

***I have included optional plates with holes for wiring. Print the optional Body and optional Pipe(once) if you intend to use wired LED lights.

Features

Overall lightbox size: 185 mm × 243 mm
Double-sided illuminated panel
Fully 3D printed faux pipe + chain hanger
(AMS friendly)
Clean, simple assembly

Printing Notes

Designed for use with Battery-powered LED strip lighting inside the box
PLA works great for indoor display
PETG recommended if installing in warmer environments
Adjust LED brightness to get the glow level you prefer

FILAMENTS USED

Bambu Basic PLA - Black
Bambu Basic PLA - Red
Bambu Basic PLA - Sunflower Yellow
Bambu Matte PLA - Desert Tan

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.

Comment & Rating (20)

@user_1145669085

Boosted

could you also make this one with Ferrari

The designer has replied

@Chris_Robertson

This is Ferrari, I am confused.

@Chris_Robertson

OK, I replied from my phone on that. So you are wanting a Ferrari light like the Porsche light. Got you. I will add it to my list.

@user_1145669085

Boosted

Replying to @Chris_Robertson :

thank you

@Dutchapple4life

Chris, I'm writing this in Dutch and it will be translated by makerworld. I've had a lot of setbacks trying to print even one plate of the Porsche logo. I don't know how it can happen and I've tried it on various printers, but for some strange reason, it couldn't load the standard black PLA and didn't pick it up in the print head. I also had a time when it didn't see black and I started printing with red, which went well, but then the logo was incorrect because black became red. Finally, when it didn't want to load black, I swapped PLA black for PLA Matte Black and then it worked... No idea where the fault lies, but I'm super happy with the end result... thanks for this beautiful design

The designer has replied

Show original

@Chris_Robertson

That sounds like you are having some issues getting your mapping right on your AMS and filaments. The model only tells it which color to pull. You have to map the colors to your AMS units.

@Dutchapple4life

Replying to @Chris_Robertson :

The special thing is that I used the exact same colors (Bambu numbers) as you in your design. and yet... but it's successful now

Show original

@Chris_Robertson

Replying to @Dutchapple4life :

Did you select them from your drop downs on the "Prepare" screen?

@Agusconan

Print Profile

0.2mm layer, 2 walls, 20% infill

It's breathtaking

Show original

@Dutchapple4life

It fits perfectly with the collection

Show original

@user_2642698894

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

@GrampaDanPhd

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

Just fantastic- the only issue I had was that matte doesn't bond well with other PLA sometimes. Have printed 3 in ivory PLA and given away. 100%

The profile uploader has replied

@Chris_Robertson

I just updated this file to include a bonding/diffusion layer on layer 5. It helps out with this situation. You might give it a try again if you decide to prin tmore.

(Edited)