Dolls House Shower Cubicle
Print Profile(1)
Description
A great addition to your dolls house collection. This modern shower cubicle comes with a sliding door & shower tower module with overhead spray, body jets and display screen.
The 4 plates I printed were complete white but my granddaughter decided to add some colour. Came out pretty good. Someone with the talent of colour could transform this cubicle into a masterpiece.
To assemble - glue the module into the right back corner. Place the door into the bottom groove.
Glue the roof on ensuring the door is sitting in the roof groove.
The below filament and print times are based on the model size we wanted ( 215mm H x 150mm W x 100mm D ). Scale the plates to suit your requirements.
Plate 1 Cubicle -
No Supports
No AMS
0.20 Layer , 2 walls , 15% infill
Filament - 242.86g
Print Time - 6h 4m
Plate 2 Cubicle Roof -
No Supports
No AMS
0.20 Layer , 2 walls , 15% infill
Filament - 48.39g
Print Time - 1h 24m
Plate 3 Cubicle Door -
No Supports
No AMS
0.20 Layer , 2 walls , 15% infill
Filament - 32.55g
Print Time - 50m 12s
Plate 4 Shower Module -
No Supports
No AMS
0.20 Layer , 2 walls , 15% infill
Filament - 24.67g
Print Time - 50.47g
Recommend a 0.16 Layer on the module if you are scaling it down due to detail.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)