ABUS Rahmen / Frame CFT3100

🇩🇪 German: The Problem: The original part fell down and broke during installation. The Solution: This custom-fit replacement frame for the ABUS HomeTec Pro (CFT3100) can be quickly and easily printed yourself.

Print Settings: The model is designed to be very straightforward to print.

• Supports: No supports needed. The model is simply placed flat on the build plate.
• Material: PLA is completely sufficient here. If the lock is mounted on a front door that gets direct sunlight in summer, I recommend PETG due to its higher temperature resistance.
• Walls & Infill: Standard settings are completely sufficient (e.g., 3 perimeters and 15% - 20% infill).

🇬🇧 English: The Problem: Dropped the original mounting frame during installation and it snapped. The Solution: This custom-fit replacement frame for the ABUS HomeTec Pro (CFT3100) is a quick and easy print.

Recommended Print Settings: This model is designed to be a very straightforward print.

• Supports: No supports needed. Just print it flat on the build plate.
• Material: PLA works perfectly fine. If the lock is mounted on a front door that gets direct sunlight in the summer, I recommend PETG for better heat resistance.
• Walls & Infill: Standard settings are fine (e.g., 3 perimeters and 15% - 20% infill).