Adjustable LM2596 Case with Plugs

Fully-printed case for the common LM2596 DC-DC Buck/Step-Down Converter with integrated voltage display. This is an alternate version of my board-only case (https://makerworld.com/en/models/2256195-adjustable-lm2596-case-display-version) that additionally holds a USB breakout board and a barrel-jack screw terminal for input and output interfaces. Like the original model, this one can be customized to exactly match the LM2596 board that you have, since they all seem to have slightly different sizes and layouts. 

Please refer to the original model for general customizing, slicing, printing, and assembly instructions. 

Model-specific info:

• This model additionally lets you customize the length and width of the USB breakout board. The default is 17.5mm square. 
• This uses the same snap-on lid design, and the snaps are in the same place as the original (not on the outside edge). This makes the lid a bit harder to attach and remove. 
• This model does not include holes for the screw terminals, since you shouldn't don't need access to those when you're connecting them to a integrated ports. 
• By default this uses the barrel jack as input and the USB board as output, but a “swapped” second lid is included that lets you switch the input and output sides by rotating the board 180 degrees in the case. 

Testing all possible combinations of variables is not feasible. Please double-check that the generated file looks generally correct before printing. Let me know if you encounter any weird problems with customized files and I'll do my best to fix them in the customizer.