Drink Bottle Holder for Paddle Board SUP

Elegantly embossed SUP drink holder to use with your paddle board (SUP) bungee cord. The groove for the bungee is 8mm wide.

The wide base of the holder will help your drinks stay upright on the board. Several sizes available for different bottles and containers, chose the print profile as per your required diameter. 

🌊 [ Lanyard option ]  

The model also includes a hole in the baseplate for a paracord, so you can secure the holder or other stuff if you tip over.

📏 [ Dimensions ]  

The available diameters are in the print profiles, measure you bottle and chose a holder about +2mm wider 

The drink pocket is 90mm deep (add 12mm for the base for the total height).

* Drink pocker is deeper at 100mm due to diameter

📇[ Printing ]  

No temporary supports, ready to use after the print. 

Models shown are in PETG. Not tested with PLA but should print fine in PLA (PLA is not ideal for hot sunny days).

⚖️ [ Licence and terms of use ]

Even you create you own 3D model from the generator, the file generated is still licensed under the Standard Digital File License, so you cannot republish a file generated from my model.

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.