Anime Maid Figure
Print Profile(2)
Description
This is a 3D model created from an image generated by Gemini
It has been divided to facilitate printing and coloring on a 3D printer
Be careful with thin parts when removing supports (fingers, chest ribbon, etc)
::Caution:: The ribbon is thin and difficult to print
For Single Color, the base and leg must be glued (Multi Color is merged)
The recommendation is 0.16mm layer height
The photo was tested with a single color 0.4mm nozzle and 0.2mm layer height on ‘A1’
After applying gesso, it was colored with acrylic paints
(The eyes and mouth were repurposed from Blue Archive Ichika, so they don't quite fit)
The photo was tested with a multi color 0.4mm nozzle and 0.16mm layer height on ‘H2C’
Revision 2:
multi color - Face recolored to reduce print time
Revision 1:
single color - Arms are separated from the body for easier coloring
To do:
separate arms for multi color too (risk of failure or quality degradation due to reduced filament adhesion from color change time)
separate neck ribbon part
Is there anything you would like to see made? Please let me know in the comments
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)