Camera Cover - Surface 10 Pro
Print Profile(1)
Description
Since I prefer to have the camera lenses on my devices covered when not in use, I developed this cover for my Surface 10 Pro
The cover is 1.0 mm thick and quite stable
I have integrated 3 ventilation slots on the top to ensure the device's ventilation is not impaired
The cover fits perfectly on the Surface 10 Pro and can be easily slid left or right as needed
Both the front and rear cameras are perfectly covered simultaneously
Although likely unnecessary, I remove the cover for safety when transporting the device or closing the keyboard
The cover is very thin, but keep the display in mind. I have read about displays being damaged when closed in other cases
****Anyone who uses this model does so at their own risk****
Printed in white PETG
Orientation: Lying flat as defined in the profile
0.2mm Standard
Walls 2
Infill 15%
I recommend printing this part in white. Otherwise, the Surface's brightness sensor will detect darkness and automatically reduce the display brightness completely. I have experienced this myself. :-)
***This model is for personal, non-commercial use only.
The files may not be distributed.***
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)