Search models, users, collections, and posts
Honor Power-W06 Wireless Charger Riser
IP Report
Print Profile(3)
PLA - 0.2mm layer, 4 walls, 15% infill
Designer
12 min
1 plate
SPECIFICO MAGIC V5 V3 - 0.2mm layer, 4 walls, 15% infill
Designer
40 min
2 plates
0.16mm layer, 3 walls, 25% infill
45 min
1 plate
Open in Bambu Studio
Boost
4
5
5
1
5
3
Released
Bill of Materials
Bambu Filaments
Select all
Description
Content has been automatically translated.
Riser of about 5.5mm for the Honor Power-W06 wireless charger
The camera bump of my Magic V5 did not allow perfect contact with the charging base. Placing it horizontally, charging stopped after a few minutes
With this thickness, the camera clears the top of the charger and I can charge without problems
Even placing it horizontally, with the camera protruding over the side of the charger, it now charges without stopping
I designed it for my V5 (with and without case) but it should also be compatible with V3 and I believe with phones with similar issues like 8 Pro, 7 and others
EDIT
Added profile with SPECIFIC support for Honor Magic V5 (and V3) to center it (ONLY vertically): in the dark at night, the center of the charger is not always found immediately
There are 2 plates for single-color and two-color printing. I used the two-color one to make a light strip with Glow filament
The camera bump of my Magic V5 did not allow perfect contact with the charging base. Placing it horizontally, charging stopped after a few minutes
With this thickness, the camera clears the top of the charger and I can charge without problems
Even placing it horizontally, with the camera protruding over the side of the charger, it now charges without stopping
I designed it for my V5 (with and without case) but it should also be compatible with V3 and I believe with phones with similar issues like 8 Pro, 7 and others
EDIT
Added profile with SPECIFIC support for Honor Magic V5 (and V3) to center it (ONLY vertically): in the dark at night, the center of the charger is not always found immediately
There are 2 plates for single-color and two-color printing. I used the two-color one to make a light strip with Glow filament
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)