Qi Yu's Perfume Bottle (Rafayel's Perfume Bottle)

I made a small model of Qi Yu's perfume bottle. The model is solid, so no liquid can be added. The overall model is quite large; you might consider scaling it down when printing. The file provides two printing methods: the coral on the bottle can be printed separately or as one piece. The difference is that if it's separate, the coral connects to the bottom of the bottle; if printed as one piece, the coral is embedded in the bottle body during printing. As I currently don't have suitable filament, the bottle body was printed with pink-purple PLA Silk filament, and the rest with ordinary silver, later colored with an electroplating pen to achieve a mirror and reflective effect. It's important to note that if you use Print in Place (FDM printing), you will need to sand or firmly press it into the reserved slot when assembling the model later.

All models are prohibited from secondary creation, re-uploading, modification, and commercial profit. They are for personal printing only.

The model is not authorized for sale by any third-party merchants.