QuickMag - Fully Printed AR15 Mag Pouch
Print Profile(3)
Bill of Materials
Description
A fully printed magazine pouch for AR15 magazines cloned from the ITW FastMag. It can be mounted on MOLLE webbing or on a belt loop. TPU bands provide tension to keep the magazine securely in place. Primarily based on a Gen III FastMag with Gen IV mounting straps.
For each pouch, print all TPU parts and ‘QuickMag - Front’, along with either version of ‘QuickMag - Back - X’.
The MOLLE version has two ears that tuck under MOLLE webbing. The belt version can be mounted to a belt with the Belt Adapter or can be mounted to the front of another QuickMag.
Recommended Print Settings (Rigid Parts): Material: PLA+ Layer Height: 0.2mm Wall Line Count: 4 Infill Percentage: 20%+ Support: Tree | Recommended Print Settings (TPU): Material: TPU 95A Layer Height: 0.2mm Wall Line Count: 4 Infill Percentage: 100% Support: No |
Boost Me (for free)
Thank you for checking out my model. And thank you to everyone who likes and boosts my models, it helps me out a lot more than you may think!
License
Comment & Rating (8)