P2S filterbox active carbon
Print Profile(1)
Description
Description
Replacement filter box for the P2S active carbon filter to replace the original filter
Approximately 150g of active carbon pellets fit in, and the airflow is slightly increased compared to the original
The box has recessed grips and can be filled through the generous opening without a funnel
The pattern and size can be changed in the project via the infill. For this, modify Body.stl_2 & Filter.stl_2
I used 21% honeycomb
It is only important that top & bottom layers are set to 0
Handling
Before filling, I inserted a thin HEPA filter and almost filled the box with the pellets
A little space is still needed to close it
The lid has a notch and snaps firmly into place after insertion to prevent slipping
The carbon should be replaced regularly according to the manual
Boost Me (for free)
if you like it, leave me a boost
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (8)