Parametric Universal Lid for Bowls

A custom-made lid for any round bowl or can. The model is fully parametric and can be adjusted directly in the MakerWorld Customizer. Simply measure your bowl, enter the values, and generate

Material Recommendation: Ideal for TPU. This ensures the lid seals flexibly and doesn't slip. PLA or PETG also work without problems – just pay attention to the "Clearance" parameter so that the hard plastic lid doesn't get stuck later.

Gemini said

Here you go, here's your text. Compact, without drama, and straight to the point:

Title: Parametric Universal Lid for Bowls

Description: A custom-made lid for any round bowl or can. The model is fully parametric and can be adjusted directly in the MakerWorld Customizer. Simply measure your bowl, enter the values, and generate

Material Recommendation: Ideal for TPU. This ensures the lid seals flexibly and doesn't slip. PLA or PETG also work without problems – just pay attention to the "Clearance" parameter so that the hard plastic lid doesn't get stuck later

The Parameters (Customizer):

• Bowl_Diameter: The exact outer diameter of your bowl
• Wall_Thickness: The material thickness of the lid (2 to 3 mm is a good guideline)
• Rim_Height: The height of the outer edge that grips over the bowl
• Clearance (Play): For TPU, 0 to 0.1 mm is often sufficient. For PLA/PETG, you should enter approx. 0.4 mm

• Snap_Lip: Depth of the inner snap lip for better hold. (Caution: For rigid materials like PLA/PETG, use only very small values like 0.3 mm, otherwise the lid will break when put on. With TPU, the lid audibly clicks into place in the bowl.)