H0 Straight Bridge (180mm)
Print Profile(1)
Description
Recreation of the classic Märklin 74618 straight bridge element designed for easy FDM 3D printing.
- Compatible with H0 Märklin C-Track
- Separate walkboards alongside the track for easier printing and assembly
- Low railing elements that can be mounted upright or upside down, just like the original Märklin design
- Should be compatible with original Märklin Bridge Pillars based on measurements found online
- Bridge body is printed vertically to achieve the best visual finish on the outer surfaces
Notes: This orientation means the layer lines run vertically when installed, which is not the optimal direction for structural strength. However, the low weight of H0 trains combined with the load distribution of the C-Track makes this a practical non-issue in normal use.
Only the side rails require to be glued after test-fit.
Find my other H0 models here: https://makerworld.com/en/collections/18675952-it-s-an-h0-world
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)