Customizable Box|Customizable Box|Secure Latch|Sliding Lid|Parametric

Customizable Box|Customizable Box|Secure Latch|Sliding Lid|Parametric

Models with freely customizable internal dimensions are provided. According to your needs, this box can hold any small items.

Parts, accessories, cotton swabs, travel essentials, small electronics, bank cards, stationery...

There are two customizable files (Customizable Box -Body, Customizable Box -Lid) corresponding to the box body and lid respectively.

Special note: When customizing the two files, their respective 3 dimensions below must correspond and be exactly the same for the lid and body to match.

3 customizable dimensions:

Inner length (inner length) ---- not less than 25mm

Inner width (inner width) ---- not less than 25mm

Inner height (inner height) ---- not less than 6.5mm

Example:

Set, box body inner length=50, inner width=35, inner height=25

Then, lid inner length=50, inner width=35, inner height=25

However, due to the relatively small latch design, it is not recommended to make the dimensions too large; dimensions within 100mm are more suitable.

The provided print profile includes two boxes with predefined dimensions, namely 60x60x10mm and 45x45x15mm, which can be printed directly. A print profile for a transparent lid is also provided.

Note: The 60x60x10mm print profile includes an insert, which is specifically made for woodworking dowel centers (Dowel Center); you can print it if you need it.

Customize the dimensions, download the model, import the downloaded STL model directly and replace the model in the print profile, then you can print it.

Enjoy