Smoggy3D

cover

split2.jpg

split3.jpg

render2.jpg

Body

plate_1.png

Parts

plate_2.png

Eyes

plate_3.png

c3a77e973a33d028.jpg

No AMS needed!Parts need to glued in.

Separate Parts, 0.12mm layer, 2 walls, 10% infill

ams1.jpg

AMS, 0.16mm layer, 2 walls, 10% infill

All parts

The Endless River

PXL_20260308_234938889.jpg

Identical to the original with split parts, but everything is on a single plate for both speed and convenience.<ul style="list-style-type: disc"><li>Should go without saying, but an AMS is required — unless you add pauses and manually swap filament between objects.</li><li>Be sure the print sequence remains “Print by Object” or you&#39;ll unnecessarily go through a lot of filament and waste a lot of time, completely defeating the purpose of this profile.</li></ul>If you like this profile, please remember to rate it, boost the designer and explore their other models. If you really like this profile, feel free to <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@TheEndlessRiver/upload">check out my models</a> as well and boost one (or more) of them if you have boosts to spare. 😊

Separate parts, one plate, any printer w/AMS — fast & easy!

3d-boss

aa.jpg

<ul><li>Wall Order: Outer/Inner This ensures that the complex woven texture on the exterior is printed with maximum precision before the inner walls are laid down. It prevents the internal structure from &#34;pushing&#34; the outer layer, keeping the fine details sharp and consistent.</li><li>Reduced Initial Layer Speed (35 mm/s) Since the capybara has small feet as its only contact points with the bed, slowing down the first layer ensures a much stronger bond to the PEI plate. This drastically reduces the chance of the model tipping over or shifting during the high-speed movements of the A1 mini.</li><li>Increased Top Z Distance (0.27 mm) The knitted texture makes support removal difficult because the &#34;loops&#34; can easily fuse to the support interface. Increasing this gap allows the supports to snap off cleanly without scarring or pulling away the delicate surface details of the model.</li></ul>

0.2mm layer, 2 walls, 10% infill [Adapted support and speed]

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

🐾 Knitted Capybara 🐾&nbsp;No AMS needed! Parts need to be glued in.

Knitted Capybara

ASIA

Print Profile(4)

Bill of Materials

Description

Comment & Rating (237)

License

Related Models