Old Bike Lockring Removal Tool
Print Profile(2)
Description
This is a tool I made to remove the lockring of the axle (crankset) of an old roadbike.
- Print with 100% infill.
- It is meant to be very tight to prevent the plastic from stripping. Hammer it in, if necessary.
- Use WD40 or some other creeping lubricant to dissolve/loosen old grease (often acts like glue). Give it a few hours to soak in.
- Inner diameter is 45.8 mm; it's mostly old french, italian and japanese bikes that use this type of lockring.
I used a set of large plumbing pliers to rotate the ring. A very large wrench will work too (it will have to be comically large though)
____________________________________
How to customize parametric models: https://youtu.be/tTxtUKSM08c?si=AF2WSzBWkKsjiaGA&t=368
Boost Me (for free)
If you liked this model, boost to support the development of more things! Follow, if you want to see more of my designs! 🔥🛠️💡
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)