Rolling in The Paper Park

⚠️⚠️⚠️ATTENTION➡️Significantly improved version in the FIRST PRINT PROFILE with the following enhancements:

1. In this print, magnets are not needed, the pole has a pin that fits into the bottom part and is finally the right size to be used as a press.
2. The paper bench has been moved to the left for convenience, but more importantly, it now has a hole on the sides to insert the paper and let the pack slide inside.
3. The bucket is now near the pole.
4. The railing thickness has been increased to prevent breakage during use and assembly.
5. And finally, the holes are now a bit deeper, to allow a firmer grip on the floor.

Rolling in The Paper Park 📃is the depiction of a mini park where people skateboard🛹 but with the addition of some accessories to better perform its function.

In our little park we have:

The Bucket 🪣: Device for discarding excess material, by double-clicking the letter on the bucket you can change it to any other.

The Bench🪑: useful for keeping paper well organized and always available.

The Light Pole💡: where you can add two magnets 3mm thick and 8mm in diameter, one above and one below, which, when separated, can be used as a small press.

The Skate Rail🛹: a revisited skate rail for grinding but with a central recess for convenience.

The Floor🛣️: is available in two versions: the first with all the recesses to fix and glue the various simple objects, while the second has the name written in the center with the possibility of being modified and subsequently hollowed out using Boolean Mesh for difference.

+++ATTENTION+++

Everything should be glued to the floor with a dab of glue, inserting each piece into its place.

Enjoy your stroll in the Park and let me know if you liked the idea with a rating on the print profile or a comment or support me with a boost if you feel like it..🥺🙏🏻