Zigbee Tuya Remote Stand
Print Profile(1)
Bill of Materials
- rubber feet, 10 mm diameter x 4:
Description
Angled Stand for Zigbee Scene Switches (86×86 mm)
Make your Zigbee scene switches even more comfortable to use with this practical angled stand for battery-powered smart switches and remotes.
The stand positions your switch in an ergonomic, slightly tilted angle, making it much easier to operate — perfect for a desk, bedside table, sideboard, or kitchen counter.
✅ Compatibility
The stand is designed for flat Zigbee scene switches and remotes with the following dimensions (a picture of a compatible mounting plate is included in the gallery):
- Outer dimensions: 86 × 86 mm
- Center mounting holes: 60 mm spacing
Compatible models include (for example):
- MOES Zigbee Scene Switch
- ANCLLO Zigbee Smart Scene Switch
Other switches with the same dimensions and hole spacing should also fit.
🛠 Mounting
The heat-set inserts are pressed into the stand.
The mounting plate is then secured using screws into the inserts.
The remote can then be attached to and removed from the mounting plate as usual.
The release direction of the remote is embossed on the underside of the stand, making it easy to remove the switch whenever needed.
📐 Dimensions (with switch installed)
- Width: 86 mm
- Depth: 84 mm
- Height: 54 mm
- Tilt angle: approx. 25°
🔩 Required Hardware
- 2 × M3 × 8 mm hex socket screws
- 2 × M3 washers
- 2 × M3 × 5 × 4 or 5 mm press-fit threaded inserts
- 4 × rubber feet, 10 mm diameter
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)