German Longhaired Pointer - Hunting Dog - Wall Art

Willkommen bei Frank druckt 3D

Welcome to Frank druckt 3D

Frank 3D Printsへようこそ

欢迎来到 Frank prints 3D

Im a hobbyist with ambitions. You can find me here and on other Platforms. My main Platform is TikTok. The time for my Website is rare so please do not expect too much updates. On TikTok you should find daily videos about 3d printing and my Journey! Please consider following me and keep asking questions, i will try to help everybody as long as i am able too!

About this model

A good friend asked me to create a 3D model that could be hung on the wall. I did that, but I also came up with many new ideas on the subject, which I also implemented. This is one of many different models I have developed and implemented.

The necessary supports are quite minimal, and the model prints well. For my test, I chose a Silk Quadcolor. This decision was arbitrary at this point, as I didn't have a suitable brown *laugh* and thought it would look great in 4-color silk. Of course, you can create color variations as you wish. I will implement and upload other dog breeds! So stay tuned for what else is coming! Other animals like cats are now also on the plan.

I deliberately chose the scaling so that the model remains printable with an A1 mini. Of course, it also works at a significantly higher scale. However, since scaling up would also enlarge the cutout for the screw, I left this cutout as a separate negative model and did not integrate it into the main model. You can therefore scale the cutout separately to the desired size. Here is a short tutorial on how to do that:

Correctly scaling the hanger

If you wish to scale the model itself larger, please note that the cutout for hanging will also scale. This may become too large or too small, depending on how you change the scaling. Here's a guide on how to get the cutout to the desired size!

Step 1:

Measure how large the cutout for the desired screw needs to be. Use a caliper, a folding rule, or a ruler! Note down the measured value!

Step 2:

Select object “Wandaufhängung Loch.stl” in the object overview! and display the model in the slicer from below.

Step 3:

Set the outer width to the outer width of your screw +0.2-0.4 mm, so you have some tolerance and don't damage the model when hanging it!

In this example image, we would need to set the value for “X” to approximately 8mm.

Step 4:

Position the hanger where you want it! Don't forget to also move the hanger along the Z-axis so that only a small piece protrudes from the bottom of the model. Please ensure that the cutout model is correctly positioned so that it doesn't print incorrectly! The lower, smaller part of the cutout model must protrude from the main model, while the upper, thicker part must disappear within the model!

Note

For more 3D printing tips and videos on the topic, you are welcome to follow me:

TikTok: https://www.tiktok.com/@Frankdruckt3d

Instagram: https://www.instagram.com/frankdruckt3d/

This model was fundamentally created with AI assistance and further refined and edited in Nomad Sculpt. It is not a pure AI model; AI was merely used as support, but it still represents several hours of work! I would be happy if you continue to support my work and follow me! I plan to create a complete wall art series, so it's worth following my account here! You'll get all the news first on Instagram and videos about content and more on TikTok!

If you like my work there are a lot of way how to support me! 

The easiest and most direct way is to leave a boost…

You can also support me with a membership! They start at the lowest tier possible here on makerworld. For just 3 bucks a month you can force me to continue uploading more and new models ;-) I wouldn´t be able to leave a month without new models when there are people who support me with their hard earned money… LoL therefore im to well educated ;-)

Also you can use my Amazon links in the descriptions, when i tell which Filament i use! Links like this here:

Buy PLA Filaments on Amazon

But the most convenient way to support me, without paying anything is to follow me on TikTok, leave some likes, share some videos and spread the message that im there! 

If you are a designer, you can also contact me to show your models, if you are a shop or manufacturer feel also free to reach out! Im here to show people the beauty of 3D printing and sharing my journey in this hobby. Showing off what others can do is also part of the game! Support ist kein Mord! (support is no murder, we say in germany)