1:10 RC Drift Track
Print Profile(1)
Description
***This model is not mine, but wanted to share it here on Makerworld!***
I wanted a GREAT looking drift track for my home…but didn't want to pay the crazy prices.
I decided I was going to create this curb model in different diameters so I could piece together a track however I wanted!
Available in 3ft, 5ft, 8ft, and 10ft diameters. Note - those are the inside diameters of the circle - each piece is 80mm wide, so add that to get a true OD.
Good news - they are linkable/mixable. So you can transition from 10ft to 8ft and so on to create a decreasing radius corner.
The holes in the top pair with the drift walls - just use some 6mm dowel rods to get a tight fit!
Printing: I printed 2 per sheet. Used PLA. Reduced to 2 solid bottom and top layers, 5% infill. Everything to reduce the print time.
Another pro tip - I shrunk the parts 20% for a test - and they STILL WORKED! Now I could get 3 parts on a print bed and they printed quicker. Of course, this impacts your diameter as well, so plan accordingly.
Video on these parts:
***RoadsideRC, if you would like me to remove so that you can upload please let me know!***
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)