HB3 headlight bulb adapter
Print Profile(2)
Bill of Materials
Description
This Adapter was designed to change the mounting standard from some LED bulbs I had to allow me to use them in my high beam slot. The bulbs were originally 9012 type (but may fit other bult types) but the mounting plastics could be removed, meaning a simple adapter was all that is needed to change this to HB3. They were designed to use the same O-ring from the stock mounting plates. Bellow is an image of the LEDS that I used.
At a minimum I recommend printing in ABS as these bulbs get HOT. I don't think ABS is a good long term solution as extended use of high beams will easily see temps over 90 degrees. If its available print out of PAHT-CF or other high temp filament to ensure the plastic doesn't melt when in use.
Boost Me (for free)
Did this help you? I would really appreciate a boost at no cost to you!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)