Custom name sign Dr. Daniela

Anyone who can help with any amount will be immensely appreciated!

Pix key: 61dedf2c-333a-444b-b4e2-eafb977e795b

Printer: Bambu Lab A1

Settings within the slicer

Under QUALITY -
(LARGER letter) X-hole compensation: 0.1 (zero XY contour compensation, if using 2 plates)
(SMALLER letter) XY contour compensation: -0.12 (zero X-hole compensation, if using 2 plates)

Under STRENGTH -
Top surface pattern: Hilbert Curve
Top surface density: 60-80%
Sparse infill pattern: Gyroid

Under SPEED -
Top surface: 150 mm/s

Follow step-by-step for a perfect print.

NOTE: (1) The top surface pattern is at the discretion of the user to change or place the sign face down to capture the texture of the used plate.

(2) I chose to print on the same plate even when using two colors, however, if you want to add another plate to print one at a time, that also works (if you are printing on the same plate, don't forget to set it to print BY OBJECTS and also to ORGANIZE the sign to avoid collision between already printed parts).