Hueforge - Carpe Koï 002 - Free 3D Print Model

Search models, users, collections, and posts

PFigures

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

X1 Carbon

X1E

P1P

H2D

H2S

H2C

P2S

H2D Pro

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

6.3 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

Many thanks for your support!

🇫🇷 French Version

Important:
If you use a PLA different from the one specified, transmission distance values may vary and affect the final result.

Project: Hueforge - Carpe Koï 002.hfp

Print Settings: Infill: 100%

Layer height: 0.08 mm

First layer height: 0.16 mm

Model size: 194.16 x 250 mm

7 different filaments used

Filaments and Transmission Distances:

The Model is 194.16x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm

Filaments Used:
    #000000 PLA+ Sunlu Black Transmission Distance: 0.6
    #335447 PLA WANHAO DARK GREEN Transmission Distance: 0.4
    #b7db3f PLA WANHAO PEAK GREEN Transmission Distance: 3.7
    #2c6fd9 PLA WANHAO BLUE Transmission Distance: 1.9
    #418e35 PLA WANHAO GREEN Transmission Distance: 2
    #b28e3d PLA WANHAO SKIN CARAMEL Transmission Distance: 4.4
    #942b0d PLA+ SUNLU RED Transmission Distance: 3.6
    #ff8aa3 PLA WANHAO PINK Transmission Distance: 4.1
    #ffd491 PLA POLYTERRA PEANUT Transmission Distance: 0.5
    #ffffed PLA+ SUNLU WHITE Transmission Distance: 8
This print uses 10 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to DARK GREEN
    At layer #6 (0.56mm) swap to PEAK GREEN
    At layer #9 (0.8mm) swap to BLUE
    At layer #10 (0.88mm) swap to GREEN
    At layer #11 (0.96mm) swap to SKIN CARAMEL
    At layer #14 (1.2mm) swap to RED
    At layer #15 (1.28mm) swap to PINK
    At layer #17 (1.44mm) swap to PEANUT

🇬🇧 English Version

Important:
If you use a PLA different from the one specified, transmission distance values may vary and affect the final result.

Project: Hueforge - Carpe Koï 002.hfp

Print Settings:100% infill

Layer height: 0.08 mm

First layer height: 0.16 mm

Model size: 194.16 x 250 mm

10 unique filaments used

Filaments and Transmission Distances:

The Model is 194.16x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm

Comment & Rating (0)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.