Name Piggy Bank ( Luca )
Print Profile(1)
Description
LUCA Piggy Bank – 3D Print
This LUCA Piggy Bank is a decorative and personalized 3D printed model.
It is perfect as a gift, especially for children, for a birth, birthday, or as an individual decorative element in a child's room.
The model consists of sturdy lettering with an integrated coin slot on the top. On the back there is a screw cap, so that the saved money can be removed at any time.
Print Information
The model was successfully printed with the following settings:
- Layer height: 0.20 mm
- Alternative layer height: 0.16 mm for even finer details
- Material: PLA
- Multi-color printing: with AMS
The colors can be freely adjusted in the slicer.
Printing without AMS
Even without AMS, the model can be multi-color printed by setting a print pause for color change in the slicer.
Important note for the back
For the back with thread and cap, it is recommended:
- to activate variable layer height in the slicer
- to set the layer height as finely as possible in the thread area
This makes the thread and cap work much cleaner and smoother.
Features
- Personalized lettering
- Coin slot on the top
- Screw cap on the back
- Multi-color printable
- Colors freely adjustable in the slicer
LUCA Coin Bank – 3D Printed Name Piggy Bank
This LUCA coin bank is a decorative and personalized 3D printed model in a bold name design. It is perfect as a gift for children, for birthdays, newborn celebrations, or as a custom decoration for a kid’s room.
The model features a coin slot on the top and a screw lid on the back, allowing you to easily remove the saved coins whenever needed.
The rounded letter design makes the coin bank both stable and visually appealing.
Print Settings
The model prints well with the following settings:
- Layer height: 0.20 mm
- Optional layer height: 0.16 mm for finer details
- Material: PLA
- Multi-color printing: supported with AMS
All colors can be adjusted in your slicer to match your preference.
Printing Without AMS
If you do not have an AMS system, the model can still be printed in multiple colors by adding a manual pause in the slicer and performing a filament color change.
Important Note for the Back Side
For the thread and screw cap on the back, it is recommended to:
- enable Variable Layer Height
- set the layers as fine as possible in the thread area
This improves the fit and smooth operation of the screw lid.
Features
- Personalized name design
- Functional coin bank
- Coin slot on top
- Removable screw lid on the back
- Multi-color capable
- Fully customizable colors in the slicer
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (18)