Hueforge - Breakfast
Print Profile(1)
Description
Boost Me (for free)
Many thanks for your support!
🇫🇷 French Version
Important:
If you use a PLA different from the one specified, the transmission distance values may vary and influence the final rendering.
Project: Breakfast.hfp
Print settings:
Infill: 100 %
Layer height: 0.08 mm
First layer: 0.16 mm
Model dimensions: 166.67 x 250 mm
8 different filaments used
Filaments and transmission distances:
The Model is 166.66x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm
Filaments Used:
#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#292315 PLA WANHAO BROWN Transmission Distance: 0.1
#515568 PLA ERYONE MATTE NAVY BLUE Transmission Distance: 0.1
#942b0d PLA+ SUNLU RED Transmission Distance: 3.6
#ff9808 PLA ESUN ORANGE Transmission Distance: 4.8
#9b99a8 PLA ERYONE AGATE GREY Transmission Distance: 1.8
#ffd491 PLA POLYTERRA PEANUT Transmission Distance: 0.5
#f5f4f2 PLA+ SUNLU CERAMIC Transmission Distance: 1.5
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to BROWN
At layer #6 (0.56mm) swap to MATTE NAVY BLUE
At layer #9 (0.8mm) swap to RED
At layer #12 (1.04mm) swap to ORANGE
At layer #16 (1.36mm) swap to AGATE GREY
At layer #17 (1.44mm) swap to PEANUT
At layer #19 (1.6mm) swap to CERAMIC for the rest.
🇬🇧 English Version
Important:
If you use a PLA different from the one specified, transmission distance values may vary and affect the final result.
Project: Petit déjeuner.hfp
Print Settings: 100% infill
Layer height: 0.08 mm
First layer height: 0.16 mm
Model size: 166.67 x 250 mm
8 unique filaments used
Filaments and Transmission Distances:
The Model is 166.66x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm
Filaments Used:
#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#292315 PLA WANHAO BROWN Transmission Distance: 0.1
#515568 PLA ERYONE MATTE NAVY BLUE Transmission Distance: 0.1
#942b0d PLA+ SUNLU RED Transmission Distance: 3.6
#ff9808 PLA ESUN ORANGE Transmission Distance: 4.8
#9b99a8 PLA ERYONE AGATE GREY Transmission Distance: 1.8
#ffd491 PLA POLYTERRA PEANUT Transmission Distance: 0.5
#f5f4f2 PLA+ SUNLU CERAMIC Transmission Distance: 1.5
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to BROWN
At layer #6 (0.56mm) swap to MATTE NAVY BLUE
At layer #9 (0.8mm) swap to RED
At layer #12 (1.04mm) swap to ORANGE
At layer #16 (1.36mm) swap to AGATE GREY
At layer #17 (1.44mm) swap to PEANUT
At layer #19 (1.6mm) swap to CERAMIC for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)