cover

image4.jpeg

plate_1.png

0888a4f297ca464c.jpeg

Für den normalen Torque Tuned Motor und Motoren &gt;21 Turns.Kann in normalem PLA oder PETG gedruck werden.Kugellager nicht vergessen

For the normal Torque Tuned motor and motors &gt;21 turnsCan be printed in regular PLA or PETGDon't forget ball bearings

0.4mm nozzle, 0.28mm layer, 4 walls, 30% infill

image02.jpeg

Für Motoren &lt;21 Turns oder Brushless MotorenZwingend in PLA+, PETG oder PLA CF zu Drucken!

For motors <21 Turns or Brushless motors
Must be printed in PLA+, PETG or PLA CF

PETG For motors <21 Turns or Brushless motors

IMG_4106.jpg

Bitte entschudligt das Bild, das Filament war nicht trocken genug.&nbsp;

Please excuse the picture, the filament was not dry enough.&nbsp;

PLA CF: Motors with <21 Turns or Brushless

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

Speed Gear DT03

Dieses Tuning Zahnrad macht den Buggy nochmal spürbar schneller.&nbsp;Das 19er Ritzel muss zwingend eingebaut sein, für die Montage des Speed Gears muss der Motor dannor auf die 17 Position umgesteckt werden.Es sollte in PLA+, PETG oder PLA CF gedruckt werden, da das Zahnrad bei Brushless Motoren stark belastet wird. Wer den originalen 540er Torque Tuned verbaut hat, kann ohne Bedenken zu PLA greifen und mit einer 0,4mm Düse drucken.Für Brushless oder &lt;21 Turn Motoren sollte mindestens in 0,6mm gedruckt werden, hier ist PLA+ oder PLA-CF zwingend erforderlich. PETG HF kann klappen, habe ich aber zum Testen nicht da.&nbsp;Ich stelle für 0,4mm und 0,6mm jeweils ein Druckprofil bereit, mit den besten getesteten Einstellungen.Damit der Motor nicht überhitzt, müssen ebenfalls Kugellager verbaut sein.Die Kugellager passen optimal in die dafür vorgesehenen Aussparungen, bei &gt;0,30mm Schichthöhe muss die Aussparung der Kugellager leicht geweitet werden.&nbsp;&nbsp;Viel Spaß!&nbsp;&nbsp;&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please boost this model, I appreaciate it very much!</boostcontent></boostme>&nbsp;

This tuning gear makes the buggy noticeably faster again&nbsp;The 19 tooth pinion must absolutely be installed. For the assembly of the speed gear, the motor must then be moved to the 17 positionIt should be printed in PLA+, PETG or PLA CF, as the gear is heavily stressed with brushless motors. If you have the original 540 Torque Tuned installed, you can confidently use PLA and print with a 0.4mm nozzleFor brushless or <21 Turn motors, it should be printed in at least 0.6mm, here PLA+ or PLA-CF is mandatory. PETG HF might work, but I don't have it for testing&nbsp;I provide a print profile for both 0.4mm and 0.6mm, with the best tested settingsTo prevent the motor from overheating, ball bearings must also be installedThe ball bearings fit perfectly into the designated recesses; for layer heights >0.30mm, the ball bearing recess must be slightly widened&nbsp;&nbsp;Have fun&nbsp;&nbsp;&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please boost this model, I appreaciate it very much!</boostcontent></boostme>&nbsp;

Print Profile(3)

Description

Comment & Rating (0)

This remix is based on

License