Print Profile(1)
Description
The iPad4 I have was bought over ten years ago and has been sitting there unused. The battery is very durable; it won't run out of power for over a month without charging.
Considering how to utilize it, I designed this minimalist photo frame, which allows the iPad to be used as an electronic photo album and electronic calendar. Making the best use of everything.
By pressing the upper left corner of the photo frame bezel, you can press the power button to wake up the screen. Considering aesthetics, no hole was reserved for the home button on the front bezel; volume and brightness can be adjusted via touch.
Speaker and charging cable holes are reserved. A bent data cable is required for charging. No supports or glue are needed.
The A1 plate layout is very tight, but it prints perfectly. Assembly is very simple; just insert a piece of filament into the connection between the back stand and the panel.
| Insert a piece of filament into the connection between the back stand and the panel (you can print the stand first to test if the filament passes smoothly, then adjust the hole compensation) |   |
| An L-shaped Lightning data cable is required (a few yuan on PDD) | 
|
| Place the iPad into the photo frame, aligned to the left, and thread the data cable through the reserved hole | 
|
| Using the flexibility of the printed panel, slightly bend the upper side to snap it into the groove first, then press the lower side down to secure it in place. | 
|
Installation complete.
Boost Me (for free)
If you like it please give it a boost thank you
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)