Print Profile(1)
Description
Connect 2 rain barrels without drilling
This is a connecting pipe to connect two rain barrels without drilling.
The second barrel is automatically filled when the first barrel is full.
The overflow directs excess water into the second barrel as long as the water level of the full barrel is above the opening of the connecting pipe.
Due to the special "W" shape of the pipe, water remains in the pipe after equalization.
Thus, the overflow automatically works again as soon as the first barrel is full again.
Setup is simple:
turn the pipe under water until all air has escaped, then lift the pipe upwards out of the water in the installed position and place it on the rim between the two barrels. See video
Boost Me (for free)
If you like the design, I appreciate a 'boost me'
Membership
By signing up as a member, you receive permission to use physical prints of my models for commercial purposes.
© Staprin3D
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)