Marathon V22 Volt Thrower Prop Gun

This is my hand-modelled replica of the V22 Volt Thrower from Marathon.
It took me 64 hours to print this in full color, just a fair warning!
I'm also running out of space for Marathon models in my workshop!

I print on a H2C in full color, so the size has been optimized for H-Series print beds to provide a 1:1 scale print but you can still print it on other printers.
Please scale down to meet your printer specifications for best printing performance.

Printing Notes (Important)

This is a long, time-consuming print due to its size and color detailing.

For best results:

• Use a clean build plate
• Apply a gluestick for improved adhesion
• Ensure your bed is properly leveled
• Adjust speeds, brims, and adhesion settings according to your printer’s capabilities
• Consider variable layer height or height range modifiers for best surface quality (will increase print time)

Please tune your slicer settings to match your individual machine and material. Large-format prints can behave differently depending on environment and setup.

Important

This entire model was created in Fusion without the use of AI, and not a ripped model.
The model is a derivative work and not a 1:1 replica; it is also not a real firearm with no capabilities to fire.
Every part was created manually as a personal passion project.

Some of my previous models have appeared on MakerWorld and other platforms without permission, sometimes recreated using image-to-3D tools.
My models are exclusive to MakerWorld and are not to be sold under any circumstance as per Bungie's Legal Conditions. Anyone copying my models will be reported.