Metal Sonic Articulated Figure (color-separated parts, no AMS required)
Print Profile(1)
Description
Membership
If you want to 3D print and sell my models, please purchase my membership
Important notes first:
spaghetti?
If you get spaghetti, first check these things: clean the build plate, increase bed temperature by 5-10°, and apply glue as needed. The model has many details, and to achieve multi-color printing, many parts have been separated. Some parts are small, which will inevitably increase the printing difficulty. The models have all been print tested, so please do not give a low rating just because of one spaghetti incident.
Loose connections?
There may be some differences between different filaments and depending on printer calibration. For loose connections, you can apply a thin layer of glue to the joint. Let it dry completely before reassembling. This can provide extra friction for a tighter fit.
Assembly?
Apply vertical force and support the object as much as possible. Some joints may be tight after assembly; do not force them. Let them sit overnight, then carefully rotate.
Filament?
Try to use PLA Basic or PETG, and avoid filaments with insufficient layer adhesion like PLA Matte or PLA Silk, as they may break!
Introduction
Metal Sonic is here, fully articulated. Color-separated and pre-plated, no AMS required. This is currently the most complex figure in the Sonic the Hedgehog articulated figure series, requiring glue for assembly. Some parts are small, so be careful during assembly. Assembly instructions in PDF format are attached at the bottom of the page, and you can also check the name of each part through Bambu Studio.
I've made other things too; feel free to check out my homepage if you're interested:
Sonic the Hedgehog series
Zootopia 2 is out, do you want to print a Judy Hopps and Nick Wilde to watch the movie with you? Also fully articulated and with movable eyes! Plus, there are dressed-up versions of Judy and Nick!
Also Nezha and his good friend Ao Bing, also articulated!
Does anyone like Dragon Ball? Son Goku, Vegeta, Kid Goku, Kid Trunks, Krillin, all articulated!
And Pikachu? Also articulated.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (134)