Zip Tie Mount / Cable Anchor (27×27 mm)
Print Profile(1)
Description
his model is a compact 3D printed cable tie anchor designed for quick and reliable cable management.
The mount allows you to secure cables, wires, or small tubing using a standard zip tie. It can be installed in different ways depending on your needs.
Installation options
The mount can be attached using:
- a screw through the center hole
- double-sided adhesive tape
This makes it useful for many surfaces such as walls, panels, workbenches, or inside electrical enclosures.
Available sizes
Two versions are included:
- 27 × 27 mm
Choose the size that best fits your project.
Typical uses
- cable management
- workshop organization
- electronics projects
- mounting wires inside cabinets
- DIY installations
Printing recommendations
- Material: PLA / PETG
- Layer height: 0.2 mm
- Supports: not required
- Print orientation: flat on the base
PETG is recommended if the mount will be used in warmer environments.
💡 Tip:
For stronger mounting, use a screw. For quick installations on smooth surfaces, double-sided tape works well.
If you like this model, consider boosting it 🚀
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)