SCX10 Pro Permanent Underdrive Spacer
Print Profile(1)
Description
This spacer allows you to remove the 1:1 gear set and shifter assembly from the SCX10 Pro transfer case to permanently lock the rear output in underdrive. The spacer can also be installed to remove the under drive gear set and lock the transfer case into 1:1 output.
Approximately 80 grams of weight is eliminated from the rear of the chassis after installing the spacer (1:1 gear set, shifter fork, shifter slider, and shift servo are all removed).
The tolerances are fairly tight to lock the 46t rear output gear to the shaft without any play, so depending on your machine, you may need to scale the x- and y-axis up or down. Scale in 0.5% increments to maintain a tight fit. Be sure to increase the wall count and in-fill for max strength as well.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (3)