Mini Box with Sliding Roll Top Lid

This is an ultra compact storage container with a sliding, roll top lid. This container measures just 7cm in length making it ideal for small pieces, SD Cards, dice or screws. No glue is required. 

I have tested this print on 3 different Bambu Labs filament. If you encounter any issues or have any suggestions for how to improve, I will try to respond to comments as soon as possible. 

The lid of this print is only 3 layers tall, it may be necessary to use a scraper to remove from build plate. Take care not to damage your build plate!

Please let part cool on print bed completely for easier removal and to prevent bending. 

Assembly:

There are no supports for this print, other than a brim around the lid of the container. This brim should be removed completely, with no remaining excess plastic. For example in the image below, the black lid has excess plastic in the red circle which must be removed. This must be done with care as this model uses precise tolerances. 

1. Insert thin lid into main, largest component of container as shown below. Ensure the correct orientation of the grip piece. The lid must be inserted into the groove.
2. It may be easier to install the end cap by aligning and pushing it into the rounded (circular) end first. No glue should be required.