X3D-v3 Riser | Bambu Lab X1/P1 AMS Stand by DutchWorkX3D

DutchWorkX3D

3D Printer>3D Printer Accessories

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 15% infill

Designer

12.8 h

1 plate

4.5(14)

Dual color, all necessary parts

40.3 h

6 plates

4.8(50)

0.2mm layer, 3 walls, 10% infill, Build Plate supports only

31.8 h

4 plates

4.8(70)

0.2mm layer, 3 walls, 20% infill, Generic PETG

51.7 h

10 plates

4.7(28)

Click to see more

Boost

747

1426

245

4.3 k

2.9 k

Released

Description

check my FB page https://www.facebook.com/groups/bambu3d4all
There is a lot of info and help there ;-)

I designed v3 from scratch based on the v2 version.

It now has more strength and more place for honeycomb / hex add-ons.

I have added:

Honeycomb / Hex Ledstrip holder
Honeycomb / Hex Build plate holder
Honeycomb / Hex Top glass holder

I have added the 3mf file with the settings, of course you can adjust to your own settings.

I get a lot of requests and I don't mind following up on them as it makes these projects more interesting, although it takes a lot of time I really don't mind spending my time but I would appreciate it if you join the club as club members can be assured I follow up on their requests.

If you like you can join my Bambu3D4All FB page

https://www.facebook.com/groups/bambu3d4all/

Comment & Rating (245)

@lilrepete

Print Profile

0.2mm layer, 3 walls, 10% infill, Build Plate supports only

I am so excited ro have found and then printed it twice now....Thanks!

@cmcraig2

So what is the front bar for?

@lilrepete

Replying to @cmcraig2 :

it is to tilt up in the front just to vent , so it will be open at about 30 degrees. Sometimes you may not need to remove it completely to maintain the temp that you may need. You could just let the back side of the glass rest on it usual spot on the printer and the front of the glass rest on that bar....

(Edited)

@cmcraig2

Replying to @lilrepete :

Thanks for the explanation

@kentravelers

This is so awesome, thank you so much for making it. I still have my AMS up top my printer and I can clearly see what’s going on from above. it makes Marie nice so much easier and looks good. I went with the silver and red theme. For those who are saying that the pieces don’t line up, you must likely have the back pieces lined up wrong, switch the positions of either one, then turn it 90 degrees (that means clockwise). The connectors are available when you download the raw model files. it’s easy, and the file is literally called connectors. When I get a second printer I’m definitely going to print this riser again. Thanks again!

The designer has replied

@DutchWorkX3D

Thank you for your honest review en your printed riser looks awesome :-)

@ZachC1221

Hey friend, how did you print that samurai mask with multicolor? I’m new to 3d printing and found that model but don’t know how to do multi color like that without printer swapping filaments 200+ times

@kentravelers

I found the model in Thingiverse, someone remixes the mask where they separated the face and the teeth by themselves. So, all I did was printed the face black, then afterwards printed the teeth red. Here’s the remixed link: https://www.thingiverse.com/thing:4564765

@Tracestanley

Came out perfect. I added a bunch of holders on the side and had to give the ol' printer a name. Thanks for the design.

The designer has replied

@DutchWorkX3D

Wow,love what you have done with the colors :-)

@ml417lk3

Where did you get the holders from?

@dr.penguo

可以分享下吗？谢谢！

@Tack3D

Printed total of 6 sets for my printers, it is helped a lot with maintenance. Added my print profile

(Edited)

The designer has replied

@DutchWorkX3D

that is good to hear 😀

@DutchWorkX3D

Looking awesome

@elliottr

Should it overhang so much at the back? Nothing holding it steady on the P1P worries it may vibrate itself off.

The designer has replied

@DutchWorkX3D

Yes there is overhang but with the p1p you should try to settle it at 2 or 4 spots so it can't move as there are no side panels to hold it in place.

@elliottr

Replying to @DutchWorkX3D :

I plan to buy the P1S side plates. Assume that will stop it moving side to side?

@DutchWorkX3D

Replying to @elliottr :

for sure, I have it on both my P1S's

@Carreta

So what I did wrong? I just printed all plates and it does not fit. Rear parts are longer. Why there is profile where you can waste so much filament?

The designer has replied

@DutchWorkX3D

Rotate the rear parts 90 degrees and switch right to left and vice versa.

@Carreta

Replying to @DutchWorkX3D :

Figured it out before you commented... I am really sorry. Made myself really dumb. Its great mode.

@MINDS.

Print Profile

0.2mm layer, 3 walls, 20% infill, Generic PETG

imprimi durante 2 dias las 4 piezas para que despues no encajen entre si. la idea me parece una bestialidad. Pero gasté mas de 700 gramos para tirarlos a la basura.

The designer has replied

@Ghostking17

It would apear that the orientation of the back pieces is backwards in your picture. the legs although they look similar, are not the same length. The back pieces are not interchangeable, they need to be swapped but they appear to be printed correctly. So I hope you did not throw them out and waste all your filament.

@timmys24

I did the same thing haha thought I messed something up