HERO HAMMER GROSSO ARMOR

I am a father of two beautiful daughters and I enjoy introducing them to the multiverse through nerd objects that I 3D print. This is one of the models from my collection, which I share with 3D printing enthusiasts, also to receive constructive feedback and continuously improve. I am a big Bambu Lab fan and all my prints are made with P2S and A1 Mini

I do test prints at a reduced scale (10 cm) to check the stability and performance of the model. But here's an important tip: if you print it larger, around 15 cm, you'll not only gain details but also make it easier to print. My advice? Scale it up as much as you want, but add some extra supports where necessary. The photos demonstrate that the print works. Only a basic understanding of slicing is required. If you have any doubts, feel free to write to me and I'll gladly assist you

For testing, I printed it at 10 cm: PLA Basic white 0.16 extra fine hybrid tree supports 10 mm outer brim 0 mm object spacing

The supports are very delicate. They remove without damage, but must be taken off one by one, slowly, with tweezers and patience. No need to 'go Rambo' on the supports... you'll regret it

If you want to collect them all... come here (the trap is already set):

https://makerworld.com/en/@Gara/upload

Technical notes (the truth, not poetry)

I prefer to print in a single color and paint after priming with acrylic markers. The colored images are just examples of coloring: everyone can choose according to their personal taste. The design originates from an AI generation (Tripo), manually refined and FDM-tested to ensure real printability. The "real" photos are the white monochrome ones

The aspect that determines whether you print successfully or struggle: bed adhesion

I use CryoGrip Pro Frostbite, and the adhesion is so strong that prints seem to have taken out a mortgage on the print bed: they never detach. I mainly use Bambu filaments and have no problems

If you have a different setup:

Focus first and foremost on adhesion. Use dry, quality filament. Maintain cleanliness