Street Fighter Lisa (Cammy) - No AMS

Introducing Street Fighter Lisa, the latest MixyPals mashup! Lisa enters the ring as the high-kicking Cammy White, swapping her saxophone for a disciplined Delta Red fighting stance.

Dimensions:

• At 100% scale, Street Fighter Lisa stands approximately 5.4 inches (138 mm) tall.

  Scaling up should work without any issues. If you scale down, remember that the tolerances will get smaller and some parts may be harder to assemble.

   

Colors Used:

• Bambu Basic: Black, White, Green
• Bambu Matte: Yellow, Scarlet Red, Dark Green, 
• Geetech Silk: Gold

Assembly Tips:

The Eyelashes are marked L (Left) and R (Right) on the back

Be very carful as the eyelashes are delicate. Place the eyelashes into the head first, following the L and R markings on the back. Attach the eyes, carefully aligning them with the lashes, and press the eyes firmly into place.

The Gold Triangle has a notch cut out on the bottom. This indicates up when placing on the hat. 

Assembly Steps:

• Attach each boot top to its matching boot, then secure the boots to the legs using the pins. Each pin is specific to the left or right side.
• Attach the legs to the dress using the provided pin.
• Attach the left and right arms to the body.
• Attach the fingers to the right glove, then secure the glove to the right arm.
• Attach the left front glove to the main glove. Then attach the left fingers and thumb to the left hand, and secure the completed hand to the left arm.
• Attach the gold triangle to the hat, then secure the hat to the head.
• Insert the eyelashes into the head, following the L and R markings on the back. Attach the eyes, carefully aligning them with the lashes, and press firmly into place.
• Glue the head onto the body to complete the build.
 

That’s everything. Street Fighter Lisa is ready to join your collection. Thank you so much for printing this model. We’d love to see your finished print, so be sure to share your photos!