Search models, users, collections, and posts
weightless dumbbell No ams 50kg & 100lb
IP Report
Print Profile(2)
50kg version
Designer
5 h
3 plates
100lb version
Designer
5.1 h
3 plates
Open in Bambu Studio
Boost
20
50
0
2
20
10
Released
Description
Boost Me (for free)
like the model leave a boost
- ⚡ QUICK PRINT STATS ⚡
- Print Time: Only ~4-5 hours.
- Filament Savings: Uses 5% Lightning Infill—it’s mostly air! Extremely light and saves your plastic.
- Printer: all including a1 mini.
- No AMS Needed: Designed for single-color printing.
- Assembly: Easy glue-together parts.
- A1 mini friendly: The handle and weights are separate pieces that glue together, allowing you to print a full-sized gym prop on a small printer
- Customizable: In your slicer you can change the size of the weights to build your own heavy set. Includes 50kg version weight and a 100lb weight.
- The prank: Toss it to someone and watch them panic as they prepare to catch a 100lb weight, only for it to float into their hands.
- Filament Tip: Use Matte Black or Silver for the pro “gym-look.”
if you are not planning on using the print profile: Follow these steps 1: increase your flow ratio to 1.3. 2: use 3 wall loops. 3: sparse infill density 5%. 4: sparse infill pattern lightning. 5: infill/wall overlap 5%. 6: brim settings: outer brim only, brim width 7 and brim-object gap 0. if you do not use these settings it will not work. (these settings are for the weights only, the handle is fine with no settings and print the weights with the numbers facing up). I used a dryer for the Filament but i think it might be fine without one.
- No hardware needed.
- Post your makes in the comments!!!
- If you liked this model you can check out my other models here: https://makerworld.com/en/@tonkin_20009
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)